Gossen Metrawatt K855A | Electronic load, SPL350-30 200V / 30A, 350W, RS232, opt. GPIB
Manufacturer number: K855A
Gossen Metrawatt K855A | Programmable 1-channel electronic load (tabletop device) SPL350-30 with digital multifunction display, with current, resistance, power and voltage characteristics, input 0-30 A / 200 V / 350 watts.
- 1 load input on the front
- Power: 350 W.
- Current: 0 - 30 A.
- Voltage: 0 - 200 VDC
- 4 operating modes: constant current (CC), constant voltage (CV), constant load (CR), constant power (CP)
- Resolution: with constant current from 0.1 mA, with constant voltage 2 mV, with constant load from 0.1 mΩ, with constant power 10 mW
- High-speed sequence and transient measurement, short-circuit strength, battery discharge and other auxiliary functions
- The minimum operating voltage is less than 0.6 V at maximum current load
- Programmable current rise and fall times, steep edges
- Several groups of parameters (device settings) and sequences (load profile) can be saved and called up.
- Potential-free power input / no earthing
- Safe electrical isolation
- Switchable input (input on / off)
- With constant power voltage regulation or current regulation possible
- Settings via encoder and keyboard
- Multifunctional LCD display
- Protective devices, including adjustable power limitation
- Tabletop unit, also suitable for installation in a 19 "rack
- Supply voltage 115/230 VAC 50/60 Hz
- Dimensions W / H / D (mm) approx. 215/100/280
- Weight m. Rubber protection about 6 kg
Technical Data
AC input: | 115 V - 230V |
---|---|
Article number: | K855A |
DC output reversible: | DC sink |
Dimensions (L x W x H) (mm): | 391 x 213 x 104 |
Interfaces: | RS-232 Optional: GPIB |
Mains feedback: | No |
Measurement functions: | High-speed sequence and transient measurement, short-circuit withstand, battery discharge |
Model: | K855A |
Protective devices: | OCP, OVP, OTP, OPP |
Weight (kg): | 5.8 |
max. Power (A): | 30 |
max. Voltage (V): | 200 |
Description
K855A | Electronic load, SPL350-30 200V / 30A, 350W, RS232, opt. GPIB
The electronic load (DC-Load) of the SPL series is a highly accurate direct current sink for use in research, development, production, service and training. The device is characterized by a variety of functions and a high degree of control accuracy with high ease of use.
The direct current sink (electronic load resistance) is used for the adjustable ohmic load of direct voltage / direct current sources with constant current, resistance, voltage or power. Your area of application is the static and dynamic testing of power supplies, batteries, PV modules, fuel cells, inductors, etc.
News and Knowledge
Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...