Go to homepage
  Quickly and Easily Request a Quote!
  Free Shipping for Orders higher than 50€!
  Independent Consulting!
Vergleich
Product Comparison 0 Select at least one product via the “Compare” function to activate the product comparison.
Warenkorb
Shopping Cart
Show all categories Power Supplies 251 … 12 kV DC Back

EA Elektro-Automatik PS10750-062U | DC power supply, PS 10000, 1 channel, 750V / 6A / 1.5kW, USB, analogue

Manufacturer number: PS10750-062U

PS10750-062U
PS10750-062U
PS10750-062U
PS10750-062U
Delivery time upon request

CHF 4,173.00

plus VAT. CHF 4,511.01 VAT plus shipping costs

or choose one of the following options:
Request a quote Product downloads Product inquiries Request education-price
Highlights Technical Data Documents / Downloads Description Related Articles

EA electric automatic PS 10750-06 | Programmable DC power supply, 1 channel, 750 V / 6 A / 1.5 kW, 2U, USB, analogue.

  • Number of channels: 1
  • Rated Voltage Range: 0-750V
  • Residual ripple CV rms: 50 mV BW 300 kHz
  • Residual ripple CV pp: 500 mV BW 20 MHz
  • Rated Current Range: 0-6A
  • Power: 0 - 1,500 W (1,200 W with derating for 110 V AC)
  • Nominal resistance range: 4Ω - 6000Ω
  • Output Capacitance: 40uF
  • Efficiency source / sink: 95%
  • Frequency: 45-66Hz
  • Power factor: >0.99
  • Leakage Current: <3.5mA
  • Overvoltage category: 2
  • Pollution degree: 2
  • Protection functions: OVP, OCP, OPP, OT
  • Digital interfaces: USB, Ethernet (100 MBit) for communication, 1x USB host for data acquisition
  • Expandable interfaces: CAN, CANopen, RS232, ModBus TCP, Profinet, Profibus, EtherCAT, add. Ethernet with one or two ports
  • Analog interface: 15-pin D-Sub

Manufacturer-independent

Wide variety of brands from dataTec.

To the brands

Large product portfolio

All the highlights of dataTec Switzerland at a glance.

Download here

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

Documents & Downloads

Brochure
pdf | 0.84 MB
Datasheet
pdf | 1.02 MB
Userguide
pdf | 4.21 MB

Description

PS10750-062U | DC power supply, PS 10000, 1 channel, 750V / 6A / 1.5kW, USB, analogue

The DC laboratory power supplies of the EA Elektro-Automatik PS 10000 series convert the energy from the mains into a regulated DC voltage with an efficiency of over 96%. The PS 10000 series includes single-phase and three-phase devices that, with their wide input range, can serve almost all mains voltages worldwide.

The DC voltages and currents are oriented to the application, the spectrum ranges from 0 - 60 V to 0 - 2000 V and from 0 - 6 A to 0 - 1000 A in one device. The DC power supplies act as a flexible output stage with a constant performance characteristic, the so-called autoranging, as well as a large voltage, current and power range.

In order to achieve higher power and currents, all devices have a master-slave bus. With 64 devices connected in parallel, this enables a system to be set up that provides up to 1920 kW and 64000 A. This system works like a single device and can consist of different power classes, only the voltage class must match. For example, you can set up a 75 kW system from two 30 kW and one 15 kW devices from the PS 10000 series. In addition, typical functionalities from the laboratory area are available. This includes alarm and warning management, various digital interfaces, software solutions and many other functions.

The EA PS 10000 power supplies are ideal for testing relays in production. The coils of the DC relays and the contacts are supplied with precisely defined voltages and currents. When testing the coils, important parameters such as response, operating, holding and dropout currents as well as the associated voltages must be checked and documented. Not only the current carrying capacity and the contact resistance are important parameters for the contacts, but also the dielectric strength and breaking capacity say a lot about the quality of the products.

In an on-board charger test (OBC), its electrical properties must be checked under various conditions. This requires a flexible test system that also provides measurement data. With the sequencing & logging function, test sequences can be loaded into the PS 10000 devices and data can be read out and saved. In this way, you can generate reproducible test results based on dynamic and highly accurate setting and measurement data in the shortest possible time. In order to prevent the two separate control circuits of the device under test (DUT) and the test device from oscillating against each other during testing, the control dynamics of the power supplies can be adjusted: The PS 10000 devices can be set using the three modes Normal, Fast and Slow match the control properties of the on-board charger.

The PS 10750-06 variant of the PS 10000 power supply series presented here measures 2 HE (2U) and has 0 – 750 V, 0 – 6 A, 0 – 1,500 W.

General characteristics of the series:

  • Wide input range, 110V - 240V +10% 1ph AC
  • Active power factor correction, typically 0.99
  • Very high efficiency of over 95%
  • Voltage from 0 - 60 V to 0 - 1500 V
  • Current from 0 - 6 A to 0 - 120 A
  • Flexible power-controlled DC output stages (autoranging)
  • Control mode CV, CC, CP, CR with fast transition
  • Digital control, high resolution with 16bit ADCs and DACs, control speed selection: Normal, Fast, Slow
  • Colored 5" TFT display, touch function and intuitive operation
  • Galvanically isolated share bus for parallel operation of all performance classes in the 10000 series
  • Master-slave bus for parallel operation, up to 64 devices of all performance classes of the 10000 series
  • Standard interfaces: USB, Ethernet, analog, USB host, master-slave bus, share bus
  • Optional interfaces: CAN, CANopen, RS232, Profibus, EtherCAT, Profinet with one or two ports, Modbus with one or two ports, add. Ethernet with one or two ports
  • Command languages and drivers: SCPI and ModBus, LabVIEW, IVI

Alternate products (13 products)

Alternate products (13 products)

PS10060-1202U
Serie
EA Elektro-Automatik
PS10060-1202U
DC power supply, PS 10000, 1 channel, 60V / 120A / 3kW, USB, analogue
Delivery time upon request
CHF 5,136.00
PS10060-602U
Serie
EA Elektro-Automatik
PS10060-602U
DC power supply, PS 10000, 1 channel, 60V / 60A / 1.5kW, USB, analogue
Delivery time upon request
CHF 3,959.00
PS10080-1202U
Serie
EA Elektro-Automatik
PS10080-1202U
DC power supply, PS 10000, 1 channel, 80V / 120A / 3kW, USB, analogue
Delivery time upon request
CHF 5,136.00
PS10080-602U
Serie
EA Elektro-Automatik
PS10080-602U
DC power supply, PS 10000, 1 channel, 80V / 60A / 1.5kW, USB, analogue
Delivery time upon request
CHF 3,959.00
PS10200-252U
Serie
EA Elektro-Automatik
PS10200-252U
DC power supply, PS 10000, 1 channel, 200V / 25A / 1.5kW, USB, anal
Delivery time upon request
CHF 3,959.00
PS10200-502U
Serie
EA Elektro-Automatik
PS10200-502U
DC power supply, PS 10000, 1 channel, 200V / 50A / 3kW, USB, analogue
5 in stock. Ready to ship in 1 business day
CHF 5,136.00
PS10360-152U
Serie
EA Elektro-Automatik
PS10360-152U
DC power supply, PS 10000, 1 channel, 360V / 15A / 1.5kW, USB, analogue
Delivery time upon request
CHF 3,959.00
PS10360-302U
Serie
EA Elektro-Automatik
PS10360-302U
DC power supply, PS 10000, 1 channel, 360V / 30A / 3kW, USB, analogue
Delivery time upon request
CHF 5,136.00
PS10500-102U
Serie
EA Elektro-Automatik
PS10500-102U
DC power supply, PS 10000, 1 channel, 500V / 10A / 1.5kW, USB, anal
Delivery time upon request
CHF 4,173.00
PS10500-202U
Serie
EA Elektro-Automatik
PS10500-202U
DC power supply, PS 10000, 1 channel, 500V / 20A / 3kW, USB, analogue
Delivery time upon request
CHF 5,350.00
PS10750-122U
Serie
EA Elektro-Automatik
PS10750-122U
DC power supply, PS 10000, 1 channel, 750V / 12A / 3kW, USB, analogue
Delivery time upon request
CHF 5,350.00
PS11000-102U
Serie
EA Elektro-Automatik
PS11000-102U
DC power supply, PS 10000, 1 channel, 1000V / 10A / 3kW, USB, analogue
Delivery time upon request
CHF 5,671.00
PS11500-062U
Serie
EA Elektro-Automatik
PS11500-062U
DC power supply, PS 10000, 1 channel, 1500V / 6A / 3kW, USB, analogue
Delivery time upon request
CHF 5,671.00

News and Knowledge

Modern applications for power supplies.

Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...

17/03/2021
Reading time 5 Min.
290
0

About the Manufacturer

EA Elektro-Automatik
EA Elektro-Automatik
EA Elektro-Automatik is one of the leading German manufacturers of laboratory power supplies and electronic loads for research and development as well as industrial applications in control and automation, electrochemistry, automated test systems and test benches.
Read more

Last Seen Products

Product added to compare
Product Compare added Product Compare