EA Elektro-Automatik ELR10360-803U | Regenerative electronic DC load, ELR 10000, 1 channel, 360V / 80A, 10kW, function generator

Name: ELR10360-803U | Regenerative electronic DC load, ELR 10000, 1 channel, 360V / 80A, 10kW, function generator
Brand: EA Elektro-Automatik
SKU: ELR10360-803U
Price: 14873.0 CHF
Availability: OutOfStock

Manufacturer number: ELR10360-803U

Delivery time upon request

CHF 14,873.00

plus VAT. CHF 16,077.71 VAT plus shipping costs

or choose one of the following options:

Product inquiries Request education-price

EA electro-automatic ELR 10360-80 | Programmable Regenerative Electronic Load DC 3U 360V 80A 10kW Integrated Function Generator.

Number of channels: 1
Rated Voltage Range: 0-360V
Residual ripple CV rms: ≤55 mV BW 300 kHz
Residual ripple CV pp: ≤320mV BW 20MHz
UMin for IMax (sink): <2.0V
Rated Current Range: 0-80A
Power: 0-10,000W
Nominal resistance range: 0.15Ω - 260Ω
Output Capacitance: 786μF
Efficiency source / sink: 95.5%
Frequency: 45-66Hz
Power factor: >0.99
leakage current:
Overvoltage category: 2
Pollution degree: 2
Protection functions: OVP, OCP, OPP, OT
Digital interfaces: USB, Ethernet (100 MBit) for communication, 1x USB host for data acquisition
Expandable interfaces: CAN, CANopen, RS232, ModBus TCP, Profinet, Profibus, EtherCAT, Ethernet
Analog interface: 15-pin D-Sub

Manufacturer-independent

Wide variety of brands from dataTec.

To the brands

Large product portfolio

All the highlights of dataTec Switzerland at a glance.

Download here

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

AC input:	208 V - 480 V
Article number:	33200835
DC output reversible:	DC sink
Dimensions (L x W x H) (mm):	668 x 482,6 x 133,35
Interfaces:	USB, Ethernet, Analog
Mains feedback:	Yes
Model:	ELR10360-803U
Output power (kW):	10
Protective devices:	OVP, OCP, OPP, OTP
Weight (kg):	25.4
max. Power (A):	80
max. Voltage (V):	360

Description

ELR10360-803U | Regenerative electronic DC load, ELR 10000, 1 channel, 360V / 80A, 10kW, function generator

The programmable regenerative DC loads of the EA Elektro-Automatik ELR 10000 series work regeneratively and feed the energy back into the local power grid with an efficiency of over 96%. This reduces your costs. since the energy is not converted into heat as with conventional loads.

The ELR 10000 series includes single-phase and three-phase devices that, with their wide AC input range, can serve almost all mains voltages worldwide. The DC voltages and currents are oriented to the application, the spectrum ranges from 0 - 80 V to 0 - 2000 V and from 0 - 6 A to 0 - 1000 A in one device. The DC loads function as a flexible input stage with a constant Performance characteristics, the so-called autoranging, as well as a large voltage, current and power range.

In order to achieve higher power and currents, all devices have a master-slave bus. With 64 devices connected in parallel, this enables a system to be set up that provides up to 1920 kW and a load of 64000 A. This system works like a single device and can consist of different power classes, only the voltage class must match.

A function generator is integrated in all electronic loads of the EA ELR 10000 series. This can be used to call up curves such as sine, triangle, rectangle and trapezoid in the simplest way. Voltage and current curves are freely programmable via a ramp function and an arbitrary generator. Test sequences can be saved for recurring tests and reloaded if necessary, saving valuable time.

EA devices are equipped with the most important digital and analog interfaces as standard, which are also galvanically isolated. This includes an analog interface that has configurable inputs and outputs with 0-5 V or 0-10 V for voltage, current, power and resistance, various functional inputs and outputs as well as a USB and Ethernet interface each.

Typical applications of the ELR 10000 electronic loads from EA Elektro-Automatik include testing the electrical properties of a battery. The wide range of applications includes cell, module or pack tests, the determination of the SOH (state of health) for a second-life classification and the end-of-line test (EOL).

The devices of the ELR 10000 series are ideal for testing the electrical properties of fuel cells, fuel cell stacks and fuel cell systems. They generate highly accurate and reproducible results in all electrical modes. The loads can be easily integrated into an automated test system to test the resistance, performance and lifetime of a fuel cell quickly and inexpensively. The feedback capability guarantees a highly energy- and cost-efficient use.

With the electronic loads, you can check the electrical properties as part of an on-board charger test (OBC). This requires a flexible test system that also provides measurement data. With the sequencing & logging function, test sequences can be loaded into the ELR 10000 devices and data can be read out and saved.

With the programmable electronic loads of the ELR 10000 series, discarded batteries from electric vehicles can also be checked for their possible further use. When characterizing the battery pack, the battery is first checked for its remaining capacity (state of health) in order to determine its suitability for a second life. This permanently integrated function can be called up at the push of a button.

The ELR 10360-80 variant of the ELR 10000 electronic load series presented here measures 3 HE (3U) and has 0 - 360 V, 0 - 80 A, 0 - 10,000 W and, like all models in the ELR 10000 series, an integrated function generator.

General characteristics of the series:

Wide input range, 208V - 4 80V +10% 3ph AC
Active power factor correction, typically 0.99
Regenerative with energy feedback into the grid
Very high efficiency of over 96%
Voltage from 0 - 80 V to 0 - 2000 V
Current from 0 - 20 A to 0 - 510 A
Flexible power-controlled DC input stage (autoranging)
Control mode CV, CC, CP, CR with fast transition
Digital control, high resolution with 16bit ADCs and DACs, control speed selection: Normal, Fast, Slow
Colored 5" TFT display, touch function and intuitive operation
Galvanically isolated share bus for parallel operation of all performance classes in the 10000 series
Master-slave bus for parallel operation, up to 64 devices of all performance classes of the 10000 series
Integrated function generator with predefined curves
Integrated battery test
Photovoltaic test mode, MPPT
Standard interfaces: USB, Ethernet, analog, USB host, master-slave bus, share bus
Optional interfaces: CAN, CANopen, RS232, Profibus, EtherCAT, Profinet with one or two ports, Modbus with one or two ports, Ethernet with one or two ports
Command languages and drivers: SCPI and ModBus, LabVIEW, IVI

Alternate products (19 products )

Serie

Serie

EA Elektro-Automatik ELR10080-1703U

Regenerative electronic DC load, ELR 10000, 1 channel, 80V / 170A, 5kW, function generator

Delivery time upon request

CHF 10,807.00

Serie

Serie

EA Elektro-Automatik ELR10080-3403U

Regenerative electronic DC load, ELR 10000, 1 channel, 80V / 340A, 10kW, function generator

Delivery time upon request

CHF 14,873.00

Serie

Serie

EA Elektro-Automatik ELR10080-5103U

Regenerative electronic DC load, ELR 10000, 1 channel, 80V / 510A / 15kW, function generator

6 in stock. Ready to ship in 1 business day

CHF 19,046.00

Serie

Serie

EA Elektro-Automatik ELR10200-1403U

Regenerative electronic DC load, ELR 10000, 1 channel, 200V / 140A, 10kW, function generator

Delivery time upon request

CHF 14,873.00

Serie

Serie

EA Elektro-Automatik ELR10200-2103U

Regenerative electronic DC load, ELR 10000, 1 channel, 200V / 210A / 15kW, function generator

Delivery time upon request

CHF 19,046.00

Serie

Serie

EA Elektro-Automatik ELR10200-703U

Regenerative electronic DC load, ELR 10000, 1 channel, 200V / 70A, 5kW, function generator

Delivery time upon request

CHF 10,807.00

Serie

Serie

EA Elektro-Automatik ELR10360-1203U

Regenerative electronic DC load, ELR 10000, 1 channel, 360V / 120A / 15kW, function generator

Delivery time upon request

CHF 19,046.00

Serie

Serie

EA Elektro-Automatik ELR10360-403U

Regenerative electronic DC load, ELR 10000, 1 channel, 360V / 40A, 5kW, function generator

Delivery time upon request

CHF 10,807.00

Serie

Serie

EA Elektro-Automatik ELR10500-303U

Regenerative electronic DC load, ELR 10000, 1 channel, 500V / 30A, 5kW, function generator

1 in stock. Ready to ship in 1 business day

CHF 11,877.00

Serie

Serie

EA Elektro-Automatik ELR10500-603U

Regenerative electronic DC load, ELR 10000, 1 channel, 500V / 60A, 10kW, function generator

1 in stock. Ready to ship in 1 business day

CHF 15,515.00

Serie

Serie

EA Elektro-Automatik ELR10500-903U

Regenerative electronic DC load, ELR 10000, 1 channel, 500V / 90A / 15kW, function generator

Delivery time upon request

CHF 21,507.00

Serie

Serie

EA Elektro-Automatik ELR10750-203U

Regenerative electronic DC load, ELR 10000, 1 channel, 750V / 20A, 5kW, function generator

Delivery time upon request

CHF 11,877.00

Serie

Serie

EA Elektro-Automatik ELR10750-403U

Regenerative electronic DC load, ELR 10000, 1 channel, 750V / 40A, 10kW, function generator

1 in stock. Ready to ship in 1 business day

CHF 15,515.00

Serie

Serie

EA Elektro-Automatik ELR10750-603U

Regenerative electronic DC load, ELR 10000, 1 channel, 750V / 60A / 15kW, function generator

Delivery time upon request

CHF 21,507.00

Serie

Serie

EA Elektro-Automatik ELR11000-303U

Regenerative electronic DC load, ELR 10000, 1 channel, 1000V / 30A, 10kW, function generator

Delivery time upon request

CHF 15,836.00

Serie

Serie

EA Elektro-Automatik ELR11000-403U

Regenerative electronic DC load, ELR 10000, 1 channel, 1000V / 40A / 15kW, function generator

1 in stock. Ready to ship in 1 business day

CHF 21,721.00

Serie

Serie

EA Elektro-Automatik ELR11500-203U

Regenerative electronic DC load, ELR 10000, 1 channel, 1500V / 20A, 10kW, function generator

Delivery time upon request

CHF 15,836.00

Serie

Serie

EA Elektro-Automatik ELR11500-303U

Regenerative electronic DC load, ELR 10000, 1 channel, 1500V / 30A / 15kW, function generator

Delivery time upon request

CHF 21,721.00

Serie

Serie

EA Elektro-Automatik ELR12000-203U

Regenerative electronic DC load, ELR 10000, 1 channel, 2000V / 20A / 15kW, function generator

Delivery time upon request

CHF 21,721.00

News and Knowledge

Modern applications for power supplies.

Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...

17/03/2021

Reading time 5 Min.

257

About the Manufacturer

EA Elektro-Automatik

EA Elektro-Automatik is one of the leading German manufacturers of laboratory power supplies and electronic loads for research and development as well as industrial applications in control and automation, electrochemistry, automated test systems and test benches.

EA Elektro-Automatik ELR10360-803U | Regenerative electronic DC load, ELR 10000, 1 channel, 360V / 80A, 10kW, function generator

EA electro-automatic ELR 10360-80 | Programmable Regenerative Electronic Load DC 3U 360V 80A 10kW Integrated Function Generator.

Technical Data

Documents & Downloads

Description

ELR10360-803U | Regenerative electronic DC load, ELR 10000, 1 channel, 360V / 80A, 10kW, function generator

General characteristics of the series:

Alternate products (19 products )

Alternate products (19 products )

News and Knowledge

About the Manufacturer

Last Seen Products