Teledyne FLIR CM83 TRMS multiple measuring clamp
Manufacturer number: CM83
Delivery time upon request
€409.00
or choose one of the following options:
FLIR CM83 | True RMS multiple measuring clamp (current clamp with integrated multimeter) for 600 A with METERLiNK.
- In VFD mode, the variable signal frequency is processed accordingly by filters, thereby measuring the exact frequency and voltage values. This is important in service and repair work.
- Transfer of the stored measured values via Bluetooth
- Using the METERLiNK® technology, the measured values can be transferred directly to the images taken by a FLIR thermal imager.
- The CM83 is connected to suitably compatible mobile devices via Bluetooth using the "FLIR Tools Mobile" application
- Bluetooth range: maximum 10 m
- Analog bar display of the measured values
- Power and power factor measurement
- True RMS measurements of AC voltages and AC voltages with DC components
- Large, easy-to-read display, 10,000 counts
- Additional lighting with a bright white LED in the display ensures good reading even in dark rooms
- Automatic AC / DC detection even at a maximum current of 600 A.
- Automatic AC / DC detection even at a maximum voltage of 1000 V.
- Automatic resistance, continuity and diode test detection
- Measurement of harmonic content / distortion up to the 25th order
- Indication of phase rotation
- Resistance measurement up to 100 kΩ
- Frequency measurement
- Capacity measurement
- Hold the last measurement
- Peak measurement and storage
- Inrush current measurement
- Zeroing for DC currents
- Storage of maximum, minimum and average value
- VFD mode - low pass filter
- Detector for detection and display when there is no contact
- Automatic switch-off of the device when not in use
- Pliers opening: 37 mm for 31 mm cables
- Withstands a drop of 1.2 m
- Safety category: CAT IV-600V, CAT III-1000V
- Overvoltage category: IEC 61010-1 CAT IV-600 V, CAT III-1000 V, IEC 61010-2-033.
- Specified temperature range from 18 ° C to 28 ° C with specified accuracy: 0.2 * (accuracy) / ° C
- Dimensions: (H × W × L): 49 mm × 100 mm × 262 mm
- Weight 590 g with batteries
Technical Data
Accuracy current measurement AC/DC: | ±2 % / ±2 % |
---|---|
Accuracy voltage measurement AC/DC: | ±1 % / ±1 % |
Article number: | CM83 |
Current measuring range AC/DC: | 600A / 600A |
Dimensions (L x W x H) (mm): | 262 x 100 x 49 |
Diode test / continuity test: | Yes / Yes |
Direction of rotation: | No |
Enclosure (mm): | 37 |
Frequency measuring range: | 20 Hz - 9,999 kHz |
Hold: | Yes |
Measurement method: | TRMS |
Min. / Max. Measurement: | Yes / Yes |
Model: | FLIR CM83 |
Power factor: | Nein |
Power measurement (active / apparent / reactive): | 600kW / No / No |
Resistance measuring range: | 99,99 kΩ |
Resolution current measurement AC/DC: | +5 Digits |
Resolution voltage measurement AC/DC: | +5 Digits / +2 Digits |
Temperature measuring range: | No |
Voltage measuring range AC/DC: | 1000 V / 1000 V |
Weight (kg): | 0.59 |
Documents & Downloads
Description
CM83 TRMS multiple measuring clamp
An industry-standard current clamp specifically for complex fault diagnosis. The industrial clamp meter FLIR CM83 is specially designed for complex fault diagnosis with high-quality current analysis functions. These include harmonic mode to find noise from various electrical sources, rotating field mode to check the phase sequence of three-phase systems for easier diagnosis in motors and installations, and starting current mode to detect transients caused by switch-on processes. The FLIR CM83 is also equipped with filtering for converter-controlled drives for the analysis of non-sinusoidal waveforms and noisy signals in variable-speed drives. This simplifies the localization of electrical problems in complex industrial and commercial systems.
Lieferumfang
- 6 AAA batteries
- Instruction manual / CD
- CAT IV silicone test cable
- Limited lifetime warranty
About the Manufacturer
Teledyne FLIR
Teledyne FLIR is the world's largest manufacturer of thermal imaging cameras and thermographic instruments. Teledyne FLIR covers an incredibly wide range and has the optimal thermal imaging camera for every application, whether construction, research and development or industrial manufacturing.
Since 2010 dataTec is Platinum Distributor of FLIR and, of course, now of Teledyne FLIR.