PMK 885-400-000 | Sonic 4000 RF, probe, active, AC coupled, 10x, 200 Hz - 4 GHz, ± 8 V, 1.3 m

Manufacturer number: 885-400-000

PMK Sonic 4000 RF | Probe, active, Sonic 4000 RF, AC coupled, 10x, 200 Hz - 4 GHz, ± 8 V, 1.3 m (885-400-000).

  • Division factor (± 2%): 10: 1
  • Bandwidth (-3 dB): 220 Hz to 4 GHz
  • Dynamic input range: ± 8 V (guaranteed)
  • Input voltage DC (max.): ± 20 V (guaranteed)
  • Input impedance: 2 MΩ || 0.6 pF
  • Output impedance: 50 Ω
  • Rise time: 123 ps
  • Noise (input): 70 nV / sqrt (Hz), f> 10 MHz
  • Cable length: 1.3 m
  • Probe input sockets: 0.64 mm square / 0.8 mm round
  • Output connector: SMA (male)
  • Guarantee: 2 years
  • Weight (probe): 110 g

Independant Consulting

More than 25 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Description

885-400-000 | Sonic 4000 RF, probe, active, AC coupled, 10x, 200 Hz - 4 GHz, ± 8 V, 1.3 m

PMK's Sonic 4000 RF active probe is ideal for performing in-circuit measurements. With its bandwidth from 220 Hz to> 4 GHz, the high input impedance, the low noise and the dynamic range of> ± 8 V, the Sonic 4000 RF is the ideal probe for spectrum, network, RF analyzers or other 50 Ω measurement systems . With an input capacitance of <0.6 pF, 2 MΩ in parallel between the probe tip and the probe reference (1 MΩ to the oscilloscope ground), the probe enables the scanning of sensitive circuits without placing an unfavorable load on the circuit under test.

The high impedance probe reference connection is a key feature of the Sonic 4000 RF. Unlike traditional single-ended probes, which have the probe reference tied to ground and can damage customer circuitry if accidentally connected to an ungrounded test point, the probe tip impedance of the Sonic 4000 RF to earth is 1 MΩ . This function enables a current-carrying circuit to be reliably checked without the possibility of short-circuiting the reference connection of the probe tip directly to earth.

The active Sonic 4000 RF probe uses a customer-specific PMK high-speed FET input amplifier with active sheath wave compensation to ensure an outstanding high-frequency response as well as low noise and low distortion for precise measurement of customer-specific signals. The output signal of the probe has no DC component, so it can be connected to DC-sensitive measuring devices.

Accessoires (1 product)

USB vector network analyzer, 300 kHz to 6 GHz, Quad RX
Pico
USB vector network analyzer, 300 kHz to 6 GHz, Quad RX
Pico VNA 106 (PQ111)
Delivery time upon request
€6,245.00

Alternate products (1 product)

Sonic
PMK
Sonic
Probe, active, 4 GHz, high impedance (884-000-000)
Delivery time upon request
€2,950.00

About the Manufacturer

PMK
PMK is the specialist in the development and manufacture of probes for broadband measuring instruments. PMK's solutions are continuously improved and adapted to the changing needs and requirements of everyday measurement.

Last Seen Products

Product added to compare
Product Compare added Product Compare