Go to homepage
  Quickly and Easily Request a Quote!
  Free Shipping for Orders higher than 50€!
  Independent Consulting!

Product Comparison 0

Shopping Cart
Show all categories Network Analyzers Back

PICOTEST J2110A | Solid state voltage injector, DC - 40 MHz incl.J2170A power supply

Manufacturer number: J2110A

PICOTEST J2110A
PICOTEST J2110A
PICOTEST J2110A
PICOTEST J2110A
PICOTEST J2110A
PICOTEST J2110A
PICOTEST J2110A
PICOTEST J2110A
Delivery time upon request

On Request

or choose one of the following options:
Product downloads Product inquiries
Highlights Documents / Downloads Description Scope Related Articles

PICOTEST J2110A / semiconductor voltage impression, DC - 40 MHz incl.J2170A power supply.

  • Supports thermal and mechanical, high-precision control loops and amplifiers from DC to 45 MHz
  • Lowest distortion and excellent accuracy
  • Input resistance:> 2 MΩ (typical)
  • Input current: 8µA, <3 µA (typical)
  • Input: BNC sockets
  • Oscillator input: 50 ohms
  • Oscillator input: BNC socket
  • Output resistance (impression): 25 Ω
  • Output: banana jacks
  • Maximum supply voltage: ± 12 V
  • Maximum supply current: 20 mA
  • High suppression of noise from the supply voltage (Power Supply Rejection Ratio / PSRR) low intrinsic noise, control with universal input
  • Modulation input: BNC socket
  • Output: banana jacks
  • Included in delivery: J2170A, power supply for J2110A
  • Dimensions: 109.22 mm x 89.66 mm x 50.80 mm
  • Weight: 0.21 kg
  • Warranty: 1 year

Independant Consulting

More than 25 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Documents & Downloads

Datasheet
pdf | 0.70 MB

Description

J2110A | Solid state voltage injector, DC - 40 MHz incl.J2170A power supply

Since with signals (e.g. the J2100A) in a frequency range from 1 Hz to 5 MHz or more, false signals can be impressed into an Rergel loop, this frequency range is insufficient for some applications. The frequency range can be significantly increased with the J2110A semiconductor voltage impression.

For e.g. For example, a heating control may have a bandwidth below 1 Hz, but bandwidths of 100 MHz and above are decisive for a linear control with an operational amplifier. Broadband semiconductor impressions are necessary for such regulations. These embossing circuits can be used from DC to a frequency that is only determined by the structure (PC board material and layout) and the components used. Bandwidths from DC to 200 MHz can be achieved. Above 50 MHz, the connection between the insertion and the circuit under test can be very critical. It is important that the ripple of the voltage supply of the impressing circuit does not affect the dynamic range or the signal-to-noise ratio of the measurement. The measurement results are often better if the semiconductor embossing circuits such as J2110A are used instead of transformers.

The choice of the correct stamping point in the circuit to be tested is significantly more critical than with a transformer. The impressing circuit has undefined impedances at the impressing point. In order to obtain clear measurement results, one side must offer a higher impedance than the other. In a typical power supply control, the voltage divider for the control loop has a limited voltage range and is therefore the suitable point for an impression, since the output impedance of the power supply is significantly lower than the impedance of the voltage sensor of the control loop.

The output voltage level of the semiconductor impressed circuit has a limit of 10 V or 12 V, which however is not the voltage amplitude of the impressed signal (positive or negative).

Lieferumfang

included: J2170A, power supply for J2110A
  • Dimensions: 109.22 mm x 89.66 mm x 50.80 mm
  • Weight: 0.21 kg
  • Warranty: 1 year

    • Accessoires (4 products )

    Pico USB vector network analyzer, 300 kHz to 6 GHz, Quad RX
    Pico USB vector network analyzer, 300 kHz to 6 GHz, Quad RX
    Pico VNA 106 (PQ111)
    Delivery time upon request
    €6,245.00
    PICOTEST INJB01
    Bundle
    PICOTEST INJB01
    Feed Bundle 1 - starter package, signal feed network analyzers
    Delivery time upon request
    On Request
    Pico VNA 108
    Pico VNA 108
    USB vector network analyzer, 300 kHz to 8.5 GHz, Quad RX (PQ112)
    Delivery time upon request
    €8,355.00
    PICOTEST INJB02
    Bundle
    PICOTEST INJB02
    Feed Bundle 2 - without transformer, signal feed network analyzers
    Delivery time upon request
    On Request

    Alternate products (10 products )

    PICOTEST J2130A
    PICOTEST J2130A
    DC bias injector, 10 Hz - 10 MHz
    Delivery time upon request
    On Request
    PICOTEST J2100A
    PICOTEST J2100A
    Feed transformer, 1 Hz - 5 MHz
    Delivery time upon request
    On Request
    PICOTEST J2120A
    PICOTEST J2120A
    Line injector, 10 Hz - 10 MHz
    Delivery time upon request
    On Request
    PICOTEST J2140A
    PICOTEST J2140A
    Attenuator, DC - 50 MHz, 10, 20 and 40 dB, 50 ohms
    Delivery time upon request
    On Request
    PICOTEST J2101A
    PICOTEST J2101A
    Feed transformer, 10 Hz - 45 MHz
    Delivery time upon request
    On Request
    PICOTEST J2121A
    PICOTEST J2121A
    High Power Line Injector, 400V / 20A max 100Hz - 1MHz
    Delivery time upon request
    On Request
    PICOTEST J2113A
    PICOTEST J2113A
    Semi-floating differential amplifier, ground loop breaker, DC - 800 MHz, incl.J2170A power supply
    Delivery time upon request
    On Request
    PICOTEST INJB02
    Bundle
    PICOTEST INJB02
    Feed Bundle 2 - without transformer, signal feed network analyzers
    Delivery time upon request
    On Request
    PICOTEST INJB03
    Bundle
    PICOTEST INJB03
    Feed Bundle 3 - Stability, PSRR, Impedance, Signal Feed Network Analyzers
    Delivery time upon request
    On Request
    PICOTEST J2111B
    PICOTEST J2111B
    Current injector, DC - 40 MHz including J2171A power supply
    Ready to ship in 5 to 10 business days
    On Request

    Recommendations (2 products )

    PICOTEST J2180A
    PICOTEST J2180A
    Ultra low noise preamplifier, 0.1 Hz - 100 MHz, incl.J2170A power supply
    Delivery time upon request
    On Request
    PMK DCB500HZ-8GHZ
    PMK DCB500HZ-8GHZ
    DC block 50Ohm 500Hz-8GHz SMA
    2 in stock. Ready to ship in 1 business day
    €390.50

    About the Manufacturer

    PICOTEST
    PICOTEST
    Picotest specializes in precision measurement solutions for applications in the power supply industry.
    Read more

    Last Seen Products

    Product added to compare
    Product Compare added Product Compare