Pico VNA 108 | USB vector network analyzer, 300 kHz to 8.5 GHz, Quad RX (PQ112)

Manufacturer number: PQ112

Pico PQ112 | Pico VNA108 USB vector network analyzer 300 kHz to 8.5 GHz for connection to a PC.

  • VNA vector network analyzer with high performance, portable and inexpensive
  • Bandwidth 300 kHz to 8.5 GHz
  • High measuring speed: 5000 2-port measurements per second
  • 4-receiver architecture (Quad RX) for optimal accuracy
  • Dynamic range: 124 dB with a measurement bandwidth of 10 Hz
  • Low Trace Noise: 0.005 dB RMS with a measurement bandwidth of 140 kHz
  • Measurement bandwidths: 140 kHz, 70 kHz, 35 kHz, 15 kHz, 10 kHz, 5 kHz, 1 kHz, 500 Hz, 100 Hz, 50 Hz, 10 Hz
  • Measurement parameters: S11, S21, S22, S12, P1dB (1 dB gain compression / reduction of the gain by 1 dB), AM-PM conversion factor
  • Measurement parameters: mixer conversion loss, return loss, isolation and compression
  • Representation: up to 4 channels
  • Display of up to 2 measurements per channel
  • Display formats: amplitude (logarithmic and linear), phase, group delay, VSWR (voltage standing wave ratio), real part, imaginary part, Smith diagram, polar display, display in the time domain
  • After a calibration, the reference plane can be arithmetically shifted to a reference plane on the DUT
  • Transformation into the time domain
  • Impedance transformation from typically 50 Ω into a range from 10 Ω to 200 Ω
  • Tabular and graphic display and storage of the measurement data
  • "Save on Trigger" for high-speed device profiling
  • Double frequency mixer measurements with VSWR correction
  • Measurement of the 1 dB compression point "P1dB"
  • Measurement of phase changes caused by amplitude changes "AM to PM conversion" - important for digital modulation types
  • Calibration: 8 or 12 term process. Assistance with the guided 8- and 12-term calibration process
  • 6 calibration modes
  • Connection socket to the DUT: N socket
  • PC control via USB with the Windows PC operating system
  • Compact device; only takes up half a rack width, 1U
  • Dimensions: L 286 x W 174 x H 61 mm (without sockets)
  • Power supply: DC: +12 V to +15 V, 22 W.
  • Requirements for the host PC: Windows operating system

Independant Consulting

More than 25 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Description

VNA 108 | USB vector network analyzer, 300 kHz to 8.5 GHz, Quad RX (PQ112)

With the (VNA) vector network analyzer Pico VNA108 you have a handy device that offers very high accuracy at a very affordable price. The required area is slightly smaller than a DIN A4 page and is just 6 cm thick. This means that the VNA fits in every briefcase.

Vector network analyzers (VNA) are increasingly being used in many areas, in development, production and in the service area and increasingly also because of the low investment costs in training at universities and in the training of technicians. This device is used by engineers, technicians, experts, inspectors and teachers. The costs for the VNA108 compared to bench network analyzers are so low that it can also be purchased by amateurs as well as for laboratory applications by microwave experts.

With the VNAs, components such as B. amplifiers, circuits, modules and complete transmission system components from the telecommunications environment and for data transmission are examined. The measurements provide information about the linearity of components or modules and the individual frequency components of a signal can be recorded according to magnitude and phase, both on the input side and at the output of a module.

The S-parameters (scattering parameters) such as S11 (input reflection), S21 (forward transmission / amplification / attenuation of the input signal), S12 (backward transmission) and S22 (output reflection factor / output adaptation) can then be obtained automatically from these measurements.

Areas of application for the Pico USB vector network analyzer:

  • Reflectometer and transmission measurements in an ATE test environment (ATE / Automatic Test Equipment)
  • Measurement of electronic parts and components and for testing ATE connections such as cables, PC boards and wireless applications
  • Material measurements such as B. for geological material, in food technology, life science, bio-sciences or in radar applications z. B. to penetrate materials
  • Applications in inspection, testing, characterization of components in production and in the service center
  • Tests of individual broadband cables or tests in the production process, during installation, during troubleshooting or to detect errors and changes over the life of a cable or component
  • Antenna adjustment and tuning

The PicoVNA 108 can be programmed and controlled via the USB interface. Despite its small size and low cost, the instrument has a four-receiver "Quad RX" architecture to avoid typical errors such as B. To eliminate signal delays (delays) of 3-receiver designs with internal switching paths.

The PicoVNA 108 offers a dynamic range of 124 dB (at 10 Hz) with a maximum noise of 0.005 dB at the maximum bandwidth of 140 kHz. It is also possible to determine all four S-parameters at any frequency in just 190 µs (2-port measurement) - or to put it another way: 500 points in less than a tenth of a second.

Lieferumfang

  • PicoVNA108 | 8.5 GHz vector network analyzer
  • Power supply unit PS010 with voltage output 12 V, 4.5 A.
  • Carrying bag for PicoVNA 108
  • Calibration data
  • Wrench for N plugs / sockets
  • TA177 SMA M8 ring spanner
  • Pico blue USB 2.0 cable with a length of 1.8 m

Accessoires (34 products)

TA344
Pico
TA344
Calibration kit, standard, SMA (m), 50 Ohm, 6 GHz for Pico VNA106 (PQ111)
Delivery time upon request
€439.00
TA345
Pico
TA345
Calibration kit, standard, SMA (f), 50 Ohm, 6 GHz for Pico VNA106 (PQ111)
Delivery time upon request
€439.00
TA346
Pico
TA346
Calibration kit, precision, 3.5 mm (m), 50 ohms, 6 GHz for Pico VNA106 (PQ111)
Delivery time upon request
€729.00
TA261
Pico
TA261
Attenuator, 6 dB, SMA (m) to SMA (f), 50 ohms, 10 GHz
Delivery time upon request
€71.00
TA336
Pico
TA336
Cable, standard, type-N (m) to SMA (m), 6 GHz, length: 60 cm, flexible
Delivery time upon request
€259.00
TA337
Pico
TA337
Cable, standard, type-N (m) to SMA (f), 6 GHz, length: 60 cm, flexible
Delivery time upon request
€259.00
TA343
Pico
TA343
Adapter, standard, SMA (f) to SMA (f), 6 GHz
Delivery time upon request
€72.00
TA341
Pico
TA341
Adapter, precision, 3.5 mm (f) to 3.5 mm (f), 6 GHz
Delivery time upon request
€129.00
TA342
Pico
TA342
Adapter, standard, SMA (m) to SMA (m), 6 GHz
Delivery time upon request
€66.00
TA347
Pico
TA347
Calibration kit, precision, 3.5 mm (f), 50 ohms, 6 GHz for Pico VNA106 (PQ111)
Delivery time upon request
€729.00
TA041
Pico
TA041
Probe, differential 10X / 100X, 25MHz, ± 700V, BNC
Delivery time upon request
€389.00
TA170
Pico
TA170
Adapter, SMA (m) to SMA (f), 50 ohms, 18 GHz, connection protection
Delivery time upon request
€20.00
TA173
Pico
TA173
Attenuator, 20 dB, SMA (m) to SMA (f), 50 ohms, 10 GHz
Delivery time upon request
€71.00
TA181
Pico
TA181
Attenuator, 3 dB, SMA (m) to SMA (f), 50 ohms, 10 GHz
Delivery time upon request
€71.00
TA265
Pico
TA265
Cable, precision, SMA (m) to SMA (m), 13 GHz, length: 30 cm, flexible, coated
2 in stock. Ready to ship in 1 business day
€89.00
TA339
Pico
TA339
Cable, precision, Type-N (m) to 3.5 mm (f), 6 GHz, length: 60 cm, flexible
Delivery time upon request
€689.00
TA340
Pico
TA340
Adapter, precision, 3.5 mm (m) to 3.5 mm (m), 6 GHz
Delivery time upon request
€129.00
DTBK01
PICOTEST
DTBK01
Decoupling test board kit, 17 different boards
1 in stock. Ready to ship in 1 business day
On Request
J2110A
PICOTEST
J2110A
Solid state voltage injector, DC - 40 MHz incl.J2170A power supply
Delivery time upon request
On Request
J2140A
PICOTEST
J2140A
Attenuator, DC - 50 MHz, 10, 20 and 40 dB, 50 ohms
Delivery time upon request
On Request
J2100A
PICOTEST
J2100A
Feed transformer, 1 Hz - 5 MHz
Delivery time upon request
On Request
J2101A
PICOTEST
J2101A
Feed transformer, 10 Hz - 45 MHz
Delivery time upon request
On Request
TA314
Pico
TA314
Adapter, SMA (f) to Type-N (m) 50 ohms, 18 GHz
Delivery time upon request
€79.00
TA338
Pico
TA338
Cable, precision, Type-N (m) to 3.5 mm (m), 6 GHz, length: 60 cm, flexible
Delivery time upon request
€689.00
TA262
Pico
TA262
Attenuator, 10 dB, SMA (m) to SMA (f), 50 ohms, 10 GHz
Delivery time upon request
€71.00
TA312
Pico
TA312
Cable, precision, SMA (m) to SMA (m), 13 GHz, length: 60 cm, flexible, coated
Delivery time upon request
€62.00
J2120A
PICOTEST
J2120A
Line injector, 10 Hz - 10 MHz
Delivery time upon request
On Request
J2130A
PICOTEST
J2130A
DC bias injector, 10 Hz - 10 MHz
Delivery time upon request
On Request
MI030
Pico
MI030
Measuring line BNC (m) to BNC (m) 1.1 m
Delivery time upon request
€12.00
C100574
PMK
C100574
Adapter, Type-N (m) to SMA (f), DC - 10 GHz 50 Ohm, BA057
Delivery time upon request
€41.50
TA518
Pico
TA518
PicoVNA 108 E-Cal 8.5 GHz Kit Automated Calibration (SMA male)
Delivery time upon request
€1,565.00
TA519
Pico
TA519
PicoVNA 108 E-Cal 8.5 GHz Kit automated calibration (SMA female)
Delivery time upon request
€1,565.00
TA520
Pico
TA520
PicoVNA 108 Dual E-Cal 8.5 GHz Kit automated calibration (SMA male / female)
Delivery time upon request
€2,975.00
J2111B
PICOTEST
J2111B
Current injector, DC - 40 MHz including J2171A power supply
Ready to ship in 5 to 10 business days
On Request

Alternate products (1 product)

USB vector network analyzer, 300 kHz to 6 GHz, Quad RX
Pico
USB vector network analyzer, 300 kHz to 6 GHz, Quad RX
Pico VNA 106 (PQ111)
Delivery time upon request
€6,245.00

Recommendations (9 products)

PicoScope 4444 standard kit
Pico
PicoScope 4444 standard kit
USB oscilloscope 4444 incl. 3 x PicoConnect 441 & 1 x TA271 (PQ073)
Delivery time upon request
€1,545.00
PicoScope 4444
Pico
PicoScope 4444
USB oscilloscope, differential, 4-channel, 20 MHz, SUB-D9 sockets (PQ088)
Delivery time upon request
€1,295.00
PicoScope 3406D MSO
Pico
PicoScope 3406D MSO
USB oscilloscope, MSO, 4 + 16-channel, 200 MHz (PP936)
5 in stock. Ready to ship in 1 business day
€2,405.00
GPS-4303 DC power supply, 4-channel
GW Instek
GPS-4303 DC power supply, 4-channel
3 in stock. Ready to ship in 1 business day
€391.00
PP979
Pico
PP979
USB-PC differential pulse generator PG914 2-fold output, dual-mode 40/60 ps pulses
Delivery time upon request
€11,675.00
INJB01
Bundle
PICOTEST
INJB01
Feed Bundle 1 - starter package, signal feed network analyzers
Delivery time upon request
On Request
INJB05
Bundle
PICOTEST
INJB05
Feed Bundle 5 - complete package injectors, signal feed network analyzers
Delivery time upon request
On Request
INJB03
Bundle
PICOTEST
INJB03
Feed Bundle 3 - Stability, PSRR, Impedance, Signal Feed Network Analyzers
Delivery time upon request
On Request
INJB02
Bundle
PICOTEST
INJB02
Feed Bundle 2 - without transformer, signal feed network analyzers
Delivery time upon request
On Request

About the Manufacturer

Pico
Pico Technology, the leader in USB oscilloscope technology, offers innovative, high-quality and affordable alternatives to traditional benchtop meters. The wide range of PC-based digital oscilloscopes offers a full range of functions. The Pico data loggers are ideal for measuring and storing temperature, humidity, current and voltage.

Last Seen Products

Product added to compare
Product Compare added Product Compare