Pico PP979 | USB-PC differential pulse generator PG914 2-fold output, dual-mode 40/60 ps pulses
Manufacturer number: PP979
€11,675.00
PICO PP979 set | PG914 pulse generator with differential 50 Ω outputs, with 40 ps and 60 ps pulse edges - a differential output with slope steepness <60 ps and variable amplitude from 2.5 V to 6 V, a positive and negative output with slope steepness of 40 ps Tunnel diode heads and fixed amplitude of> 200 mV.
The differential output (with step recovery diode / SRD ), slope of <60 ps:
- 50 Ω output, SMA socket, with memory switching diode (Step Recovery Diode / SRD)
- Pulse slope: <60 ps, single-ended
- Two output voltages, variable between 2 V and 6 V
- Time offset of the outputs to each other in the range of ± 1ns with time increments of 1 ps
- 20 dB @ 10 GHz attenuator for each SRD pulse output
The positive / negative output (with tunnel diode ), slope of <40 ps :
- 50 Ω output, N plug, with tunnel diodes for positive and negative output
- Pulse slope: <40 ps
- Output voltage: fixed, 200 mV
- Variable time offset of the outputs to each other in the range of ± 500 ps with time increments of 1 ps
Specifications that apply to both pulse generators:
- Differential outputs
- Pulse width: 200 ns to 4 µs
- Variable internal pulse repetition rate from 1 µs to 1 s
- RMS jitter: 3 ps (typical) relative to the external trigger
- Interface: USB2.0, compatible with USB 1.1 and USB 3.0
- Dimensions: Width: 190 mm x depth: 180 mm x height: 40 mm
- Weight: 560 g
- TDR / TDT network reflection and transmission analysis
- Frequency response and spectral analysis
- Determination of time reference, jitter and crosstalk
- Semiconductor test
- Pulse and ultra broadband radar applications
- Test of laser diode drivers and controls
Documents & Downloads
Description
PP979 | USB-PC differential pulse generator PG914 2-fold output, dual-mode 40/60 ps pulses
The PP979 / PG914 pulse generator from PICO Technology offers differential pulses with slope steepnesses of <60 ps in 50 Ω. The amplitude of this output can be varied between 2.5 V and 6 V. This allows modules, transmission paths and networks with high bandwidth to be controlled with this one device. It also has a differential output with pulse edges <40 ps and an amplitude of> 200 mV.
With the output signals, which are also available differentially at the output, high-speed or broadband transmissions can be carried out in many different applications such as B. in reflection measurements, semiconductor tests, Gbit connections, interface tests and in radar systems.
Differential high-speed data transmission measurements are becoming increasingly important in the fields of data communication in computing, transmission and telecommunications. Inexpensive pulse generators with steep flanks like the PicoSource® PG900 series are currently not available on the market. PICO Technology has closed this gap with the PG900 series pulse generator.
Lieferumfang
- 2 pieces TA173, 20 dB attenuator (10 GHz) with connections SMA plug / socket
- 2 pieces TA172, 12 GHz adapter N socket to SMA plug
- Positive tunnel diode head with slope <40 ps
- Negative tunnel diode head with slope <40 ps
- 2 pieces of 50 Ω cable with SMA plug, length 60 cm
- Open-end wrench for SMA / PC3.5 / 2.92 connections
- Power supply 230VAC to 5 V / 2 A (power supply is designed for worldwide use)
- USB 2.0 cable, 1.8 m
- Transport case
- Operating instructions, quick introduction