Heinzinger EVO5000-400REV | Power supply unit, high voltage, reversible output 5000V / 0.4A, 2000W LAN, RS232
Manufacturer number: EVO5000-400REV
€8,894.00
Heinzinger EVO5000-400REV | High-voltage laboratory power supply, reversible output 5,000 V DC / 0.4 A, 2,000 W LAN, RS232 with options ramp function and ArcDetection (rollover detection).
- Output voltage: 0… 5,000 V DC
- Ripple: 0.01% pp Unom ± 100 mV
- DC output: electrically reversible
- Output via built-in high-voltage socket on HV connector with 3 m high-voltage cable
- Output current: 0.4 A
- Power: 2,000 W.
- Fully digital regulation
- Setting accuracy: 16 bit
- Setting range: 0.01% - 100% Unom
- Voltage and load regulation (line regulation) (± 10%): ± 0.01% Unom
- SCPI instruction set
- Ramp control
- Arc detection
- Predictive fan control
- Free software update for 1 year from purchase
- Single-phase AC input: 187 V - 253 V AC / 47 Hz - 63 Hz
- Ethernet and RS232 interfaces
- Can be used as a 19 inch or desktop case with an integrated stand
- Warranty: 2 years
- Dimensions: 2 U (89 mm), depth 500 mm
- Weight 11.5 kg
Technical Data
AC input: | 187 V - 253 V |
---|---|
ARC-Function: | optional |
Article number: | 00 210143 501 |
DC output reversible: | DC source reversible |
Dimensions (L x W x H) (mm): | 500 x 482,6 x 89 |
Interfaces: | RS232, Ethernet |
Model: | EVO5000-400REV |
Output power (kW): | 2 |
Protective devices: | OVP, OCP |
Ramp control: | optional |
Warranty (years): | 2 |
Weight (kg): | 12.5 |
max. Power (A): | 0.4 |
max. Voltage (V): | 5000 |
Documents & Downloads
Description
EVO5000-400REV | Power supply unit, high voltage, reversible output 5000V / 0.4A, 2000W LAN, RS232
The laboratory power supply Heinzinger EVO 5000-400REV is characterized by its reversible, reversible output voltage up to 5,000 volts DC, a current of 0.4 amps and an output of 2,000 watts.
Fast, precise, easy to use: these are the characteristics of the adjustable EVO power supply from Heinzinger. A system consisting of a microcontroller with FPGA enables complete, digital control of the EVO devices. This combination allows high performance with simultaneous speed and precision. With an accuracy and stability of 100 ppm, the EVO provides the solution for the most common applications on the market.
The HMI (Human Machine Interface) with a colored 3.5 "TFT display enables best readability. Thanks to the intuitive, clear controls, the device can be used immediately without extensive instruction. The extensive event and error memory with time markings helps error analysis and enables an immediate status query, system damage can be avoided and operational processes can be traced.
safety
In addition to interlock and I / O contacts, overvoltage and overcurrent protection as well as limit and limit functions are also on board the EVO power supplies. These properties protect the operator, the device and the equipment to be tested equally.
Options included
Ramp control and arc detection (arc detection) are included in the devices offered by dataTec. The devices can be electrically reversed. Only positive or negative polarity are optionally available.
Input current
Thanks to its wide current input spectrum of 187 V - 253 V AC / 47 Hz - 63 Hz, the power supply can be operated worldwide.
Lieferumfang
- Heinzinger EVO HV laboratory power supply
- Male Heinzinger HV connector with 3m HV cable
- Rubber feet for desk applications
- Power plug, 1.5 m, with Schuko plug (CEE7) and IEC 60320 Type C20
- Screw terminal block for I / O connector
- Manual (English / Deutsch)
Applications / areas of application:
- Research, basic research
- nanotechnology
- Laboratory area, development
- Semiconductor industry, component tests, insulation tests
- Industry (plastic and film manufacturers)
- Medical technology
Alternate products (18 products )
Recommendations (4 products )
News and Knowledge
Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...