GW Instek PEL-3111 | Electronic load 150V / 210A, 1050W, USB, LAN
Manufacturer number: PEL-3111
€3,893.00
GW Instek PEL3111 | Programmable electronic 1-channel DC load 1.5 - 150 V DC / 0 - 210 A / max. 1,050 W power in 19 inch format.
- 1 channel, programmable from the front
- Power: 1,050 W.
- Voltage range (DC): 1.5 V ~ 150 V DC
- Current range: 0 ~ 210 A.
- 7 operating modes: CC / CV / CR / CP / CC + CV / CR + CV / CP + CV
- Adjustable protection functions (OCP, OVP, OPP, UVP)
- High current increase rate: max. 16 A / µs
- Program sequence function: GO / NO-GO test
- Sequence function for the simulation of high-performance loads
- Program commands compatible with the Kikusui PLZ-4W series
- Dynamic load behavior: 0.0166 Hz ~ 20 kHz
- Soft start function: Off / On (1 ms ~ 200 ms, resolution 1 ms)
- Timer function: display of the operating time of the activated load and automatic switch-off (1s to 999 h 59 min 59 s)
- Configuration memory for 100 settings
- Analog interface
- Digital interfaces: USB 2.0 device / host, RS-232C, GPIB (optional)
- LabVIEW / USB driver downloadable
- Power supply: AC 100 V ~ 230 V ± 10%; 47 Hz ~ 63 Hz
- Weight: approx. 23 kg
- Dimensions: W427.7 x H128 x D592.5 mm
- Supplied accessories: operating instructions, power cord, protective cover, insulation board, connection cable GTL-255 for parallel connection
Technical Data
AC input: | 90 V - 132 V / 180 V - 250 V |
---|---|
Article number: | PEL-3111 |
DC output reversible: | DC sink |
Dimensions (L x W x H) (mm): | 400 x 429,5 x 128 |
Interfaces: | USB/RS232/Analog Control optional: GPIB/LAN |
Mains feedback: | No |
Measurement functions: | CC, CV, CR, CP. CR und CV, CP und CV |
Model: | PEL-3111 |
Output power (kW): | 1.05 |
Protective devices: | OVP, OCP, OPP, OHP, UVP, REV |
Warranty (years): | 1 |
Weight (kg): | 17 |
max. Power (A): | 210 |
max. Voltage (V): | 150 |
Documents & Downloads
Description
PEL-3111 | Electronic load 150V / 210A, 1050W, USB, LAN
The programmable electronic single-channel load of the PEL-3000 series is characterized by very fast load control mechanisms, a fast current increase rate of 16 A / µs and a high resolution of 0.01 mA.
This robust electronic load (current sink / electronic load resistor) is ideal for testing / load simulation of a wide variety of power conversion products, including AC / DC and server power supplies, DC / DC converters, batteries in electric vehicles, charging stations for automobiles and other components of power electronics.
In order to process higher outputs, several devices of the same type can be connected in parallel using a master / slave technology. With their flexible power combinations, the electronic loads of the PEL3000 series from GW Instek meet all test requirements in today's high-performance supply.
Accessoires (4 products )
Alternate products (10 products )
Recommendations (1 product )
News and Knowledge
Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...
About the Manufacturer
Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.