GW Instek PEL-3041 | Electronic load 150V / 70A, 350W, USB, RS-232

Manufacturer number: PEL-3041

GW Instek PEL3041 | Programmable electronic 1-channel DC load 1.5 - 150 V DC / 0 - 70 A / max. 350 W power.

  • 1 channel, programmable from the front
  • Power: 350 W.
  • Voltage range (DC): 1.5 V ~ 150 V DC
  • Current range: 0 ~ 70 A
  • 7 operating modes: CC / CV / CR / CP / CC + CV / CR + CV / CP + CV
  • Adjustable protection functions (OCP, OVP, OPP, UVP)
  • High current increase rate: max. 16 A / µs
  • Program sequence function: GO / NO-GO test
  • Sequence function for the simulation of high-performance loads
  • Program commands compatible with the Kikusui PLZ-4W series
  • Dynamic load behavior: 0.0166 Hz ~ 20 kHz
  • Soft start function: Off / On (1 ms ~ 200 ms, resolution 1 ms)
  • Timer function: display of the operating time of the activated load and automatic switch-off (1s to 999 h 59 min 59 s)
  • Configuration memory for 100 settings
  • Analog interface
  • Digital interfaces: USB 2.0 device / host, RS-232C, GPIB (optional)
  • LabVIEW / USB driver downloadable
  • Power supply: AC 100 V ~ 230 V ± 10%; 47 Hz ~ 63 Hz
  • Weight: approx. 7 kg
  • Dimensions: B214.5 x H124 x D400 mm
  • Supplied accessories: operating instructions, power cord, protective cover, insulation board, connection cable GTL-255 for parallel connection

Independant Consulting

More than 25 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

Documents & Downloads

Description

PEL-3041 | Electronic load 150V / 70A, 350W, USB, RS-232

The programmable electronic single-channel load of the PEL-3000 series is characterized by very fast load control mechanisms, a fast current increase rate of 16 A / µs and a high resolution of 0.01 mA.

This robust electronic load (current sink / electronic load resistor) is ideal for testing / load simulation of a wide variety of power conversion products, including AC / DC and server power supplies, DC / DC converters, batteries in electric vehicles, charging stations for automobiles and other components of power electronics.

In order to process higher outputs, several devices of the same type can be connected in parallel using a master / slave technology. With their flexible power combinations, the electronic loads of the PEL3000 series from GW Instek meet all test requirements in today's high-performance supply.

Accessoires (4 products)

GTL-246
GW Instek
GTL-246
USB cable type A to type B 1.2m for GDS / GLA / GSP / GPD / GLC9000 / AFG2000 / 3000 / PEL
Delivery time upon request
€10.00
GTL-248
GW Instek
GTL-248
GPIB cable, shielded, 2m for GPT-9900
Delivery time upon request
€153.00
PEL-004
GW Instek
PEL-004
GPIB card For PEL-3000 series
Delivery time upon request
€371.00
GRA-401
GW Instek
GRA-401
19 inch rack, 4 U for PPE / PPS / PPT / PEL / GPC-GPR-M / H
Delivery time upon request
€135.00

Alternate products (2 products)

63003-150-40
Exclusive
Chroma
63003-150-40
Electronic load, table 150V / 40A, 250W, USB
Delivery time upon request
On Request
63004-150-60
Exclusive
Chroma
63004-150-60
Electronic load, table 150V / 60A, 350W, USB
Delivery time upon request
On Request

News and Knowledge

Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...

17/03/2021
Reading time 5 Min.
288
0

About the Manufacturer

GW Instek
GW Instek was founded in 1975 as Good Will Co. Ltd in Taiwan. Since the beginning, the company has specialized in the development and production of electronic test and measurement equipment. The first product focus was power supplies. Today, Good Will has more than 300 different products from the fields of oscilloscopes, spectrum analyzers, signal generators, digital multimeters and LCR measuring instruments in its program.

Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.

Last Seen Products

Product added to compare
Product Compare added Product Compare