GW Instek PCS-1000I | Multimeter, shunt meter up to 300A, 6½ digits

Manufacturer number: PCS-1000I

GW Instek PCS1000I | Precision shunt measuring resistors of 0.001 Ω, 0.01 Ω, 0.1 Ω, 1 Ω, 10 Ω for five current measuring ranges of 300 A, 30 A, 3 A, 300 mA and 30 mA with integrated current / voltage Measuring device.

  • Resolution: 6 ½ sellig
  • Measurement of voltage and current
  • Five shunt ranges: 0.001 Ω, 0.01 Ω, 0.1 Ω, 1 Ω and 10 Ω
  • AC and DC measurements in the measuring ranges: 30 mA / 300 mA / 3 A / 30 A / 300 A (Max)
  • AC voltage measuring ranges: 200 mV / 2 V / 20 V / 200 V / 600 V (Max)
  • DC voltage measuring ranges: 200 mV / 2 V / 20 V / 200 V / 1000 V (Max)
  • Simultaneous display of voltage and current
  • Automatic zero adjustment
  • Integrated interfaces: USB, GPIB
  • Dimensions: Width: 210 mm x height: 80mm x depth: 390 mm
  • Weight: about 6 kg

Independant Consulting

More than 25 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

Documents & Downloads

Description

PCS-1000I | Multimeter, shunt meter up to 300A, 6½ digits

The PCS1000I is a precision AC / DC current and voltage measuring device with correspondingly precise shunt resistances of 0.001 Ω, 0.01 Ω, 0.1 Ω, 1 Ω and 10 Ω, whereby currents are measured in 5 measuring ranges from 30 mA to 300 A. can be. Not only the current but also the input voltage is displayed with an integrated 6½-digit digital multimeter.

It should be emphasized that even after a long measurement period, the measurement accuracy is retained even by changing the temperature, since materials with very low temperature coefficients are used for the shunts.

The GW Instek PCS 1000I has an isolated BNC output for oscilloscopes. This significantly reduces potential measurement errors from oscilloscopes without isolated outputs.

Areas of application for this precision current and voltage measuring device can be found in the development, product qualification and testing of all power elements and devices such as. B. power supplies, power supply units for communication systems, power supplies for servers or electronic loads. The maximum measuring voltage or the maximum measuring current can be 1000 VDC / 600 VAC or 300 ADC / 300 AAC.

About the Manufacturer

GW Instek
GW Instek was founded in 1975 as Good Will Co. Ltd in Taiwan. Since the beginning, the company has specialized in the development and production of electronic test and measurement equipment. The first product focus was power supplies. Today, Good Will has more than 300 different products from the fields of oscilloscopes, spectrum analyzers, signal generators, digital multimeters and LCR measuring instruments in its program.

Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.

Last Seen Products

Product added to compare
Product Compare added Product Compare