GW Instek GPP-1326L | DC power supply, 1-channel, 32V/6A, 192W, incl. load function (CC, CV and CR), incl. LAN

Name: GPP-1326L | DC power supply, 1-channel, 32V/6A, 192W, incl. load function (CC, CV and CR), incl. LAN
Brand: GW Instek
SKU: GPP-1326L
Price: 508.5 EUR
Availability: OutOfStock

Manufacturer number: GPP-1326L

Ready to ship in 5 to 10 business days

€508.50

% €565.00 (10% saved)

This product cannot be retrofitted!

or choose one of the following options:

Product inquiries Request education-price

GW Instek GPP-1326L | DC power supply with load function, 1 channel, 0 to 32 V / 0 to 6 A, programmable, including LAN interface.

Linear DC power supply, 1 channel: 0 – 32 V DC / 0 – 6 A
With load function (CC, CV, CR operation)
Clear 4.3-inch display (10.9 cm screen diagonal) for optimal legibility and monitoring of the measurement process
High resolution: setting 1 mV / 0.1 mA, readback 0.1 mV / 0.1 mA
Low ripple and noise: max. 350 µVrms / 2 mArms (at constant voltage, 5 Hz - 1 MHz)
Very fast transient response: max. 50 µs
Integrated protections against overvoltage (OVP), overcurrent (OCP) and overheating (OTP)
Output monitoring with alarm and measurement stop function to protect the DUT
Output control ON/OFF with adjustable delay
Sequence function for individual output signal forms or for dynamic load simulation
8 pre-programmed waveforms make setting easier: sine, pulse, square, ramp, stairs up/down/up-down, exponential decrease
Logging of output parameters: min. recording interval 1 s, max. recording interval 300 s
Storage of up to 10 sequence/delay/recording settings, data transfer via USB stick possible
Trigger IN/OUT functions for synchronization with external devices
Temperature-controlled ventilation to minimize noise
Interfaces: RS-232, USB, LAN / optional: GPIB
Dimensions: W 213 x H 145 x D 312 mm / Weight: 7.5 kg

Independant Consulting

More than 25 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Documents & Downloads

Datasheet

pdf | 2.14 MB

Description

GPP-1326L | DC power supply, 1-channel, 32V/6A, 192W, incl. load function (CC, CV and CR), incl. LAN

The metrological strengths of the DC source GPP-1326 from GW Instek lie in the high resolution (setting 1 mV / 0.1 mA and readback 0.1 mV / 0.1 mA), in the optimal residual ripple (max. 350 µVrms / 2 mArms) and in the particularly fast transient response (max. 50 µs). The large 4.3-inch display allows optimal monitoring of the measurement processes and offers clear display modes for the device settings, measured values and output functions.

The monitor function of the GPP series allows the user to set control conditions for a measurement process. An alarm and abort function reliably protect your DUT from damage. With the sequence function, both the output signal form can be determined and the sequential power output can be set in constant current (CC) or constant voltage (CV) mode, e.g. B. for dynamic load simulation. Eight preset curve functions for sine, pulse, square, ramp, stairs up/down/up-down and exponential decrease make the setting easier for you. GPP series commands comply with SCPI requirements and are compatible with GPD-X303S series commands.

News and Knowledge

Modern applications for power supplies.

Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...

17/03/2021

Reading time 5 Min.

257

About the Manufacturer

GW Instek

GW Instek was founded in 1975 as Good Will Co. Ltd in Taiwan. Since the beginning, the company has specialized in the development and production of electronic test and measurement equipment. The first product focus was power supplies. Today, Good Will has more than 300 different products from the fields of oscilloscopes, spectrum analyzers, signal generators, digital multimeters and LCR measuring instruments in its program.

Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.