GW Instek GLN-5040A | V-two-wire network simulation (LISN), 16 A, 9 kHz - 30 MHz

Name: GLN-5040A | V-two-wire network simulation (LISN), 16 A, 9 kHz - 30 MHz
Brand: GW Instek
SKU: GLN-5040A
Price: 1927.0 EUR
Availability: OutOfStock

Manufacturer number: GLN-5040A

Delivery time upon request

€1,927.00

or choose one of the following options:

Product inquiries

GW Instek GLN5040A | Single-phase V-network simulation (LISN = line impedance stabilization network) for measuring conducted interference from 9 kHz to 30 MHz. Ideal for ladder-based EMI tests; also complies with CISPR16-1-2: 2006 regulations.

Frequency range: 9 kHz to 30 MHz
Line impedance: (50 µH + 5 Ω) || 50 Ω; V type; 2-wire V network
Tested phases: One phase
AC voltage range: 0 V to 240 V AC + 10%
AC voltage range: 50 to 60 Hz ± 5%
DC voltage range: 0 to 50 V DC
Maximum allowed (continuous) current: 16 A Schuko
High pass filter (alternative): 150 kHz
Interference voltage attenuation between the device to be measured and the receiver output: 10 dB
Response source of the integrated pulse limitation: 130 dBµV
RF output: BNC socket, 50 Ω
Dimensions: W 237 x L 338 x H 133 mm
Weight 4.2 kg

Independant Consulting

More than 25 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Description

GLN-5040A | V-two-wire network simulation (LISN), 16 A, 9 kHz - 30 MHz

The two-wire V-network simulation GLN-5040A is required for EMI tests. Radio interference voltages that are generated by electrical consumers and reach the mains via the power cord can be verified with the help of network simulations and spectrum analyzers / measurement receivers. The GLN-5040A offers a stable impedance for the supply lines of the device under test and with a ground reference within the guided emission range of the DUT (Device Under Test). The GLN5040A isolates the unwanted signals from the supply network or from the power supply unit for supplying the DUT and only couples the voltage disturbances of the device to be measured to the receiver (e.g. network or spectrum analyzer). The GLN5040A meets the requirements of CISPR16-1-2 for V networks with a simulated impedance of 50 µH + 5 Ω || 50 Ω in a frequency range from 9 kHz to 30 MHz. The output impedance is 50 Ω on a BNC connector to achieve impedance matching with spectrum analyzers and other measurement equipment.

A 9 kHz to 150 kHz high-pass filter can be selected by hand, which means that the correct filter can be used for the respective standards. The GLN-5040A is also suitable for measuring the interference voltage on the phases of the device cable.

A large leakage current can occur due to design principles. It is therefore advisable to ground the device during use and, if necessary, to operate it with an isolation transformer. The isolation transformer GIT-5060 delivers an output power of 900 VA and should therefore cover most measuring situations for devices to be measured.

Lieferumfang

BNC cable 2m
GLN5040A basic device
Schuko to GB socket
BNC lead
Adapter BNC plug to type N plug
operation manual
Warranty card
Test report

Accessoires (3 products )

GW Instek GIT-5060

Isolating transformer, 900VA, 250 V, 4 A, 50-60 Hz

Delivery time upon request

€886.00

Exclusive

Exclusive

GW Instek GSP-9330

Spectrum analyzer, 9 kHz - 3.25 GHz, LAN / USB / RS-232, AM / FM / ASK / FSK, -122 to +33 dBm

Delivery time upon request

€5,238.00

GW Instek GPL-5010

GW Instek GPL-5010 transient limiter, 9 kHz - 200 MHz, max. 2.5 W input power, BNC input on output type-N

Delivery time upon request

€567.00

Alternate products (3 products )

Schwarzbeck NSLK8127

V-network simulation, LISN, CISPR 16-1-2, 9 kHz - 30 MHz 2x16 A Schuko socket, single phase

Delivery time upon request

On Request

Schwarzbeck NSLK8126

V-network simulation, LISN, CISPR 16-1-2, 9 kHz - 30 MHz 4 x 16 A CEKON socket, 2 x 16 A Schuko socket

Delivery time upon request

On Request

Schwarzbeck NSLK8128

V-network simulation, LISN, CISPR 16-1-2, 9 kHz - 30 MHz 4 x 32 A, 2 x 16 A Schuko and 4 x 32 A CEKON

Delivery time upon request

On Request

About the Manufacturer

GW Instek

GW Instek was founded in 1975 as Good Will Co. Ltd in Taiwan. Since the beginning, the company has specialized in the development and production of electronic test and measurement equipment. The first product focus was power supplies. Today, Good Will has more than 300 different products from the fields of oscilloscopes, spectrum analyzers, signal generators, digital multimeters and LCR measuring instruments in its program.

Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.

GW Instek GLN-5040A | V-two-wire network simulation (LISN), 16 A, 9 kHz - 30 MHz

GW Instek GLN5040A | Single-phase V-network simulation (LISN = line impedance stabilization network) for measuring conducted interference from 9 kHz to 30 MHz. Ideal for ladder-based EMI tests; also complies with CISPR16-1-2: 2006 regulations.

Description

GLN-5040A | V-two-wire network simulation (LISN), 16 A, 9 kHz - 30 MHz

Lieferumfang

Accessoires (3 products )

Alternate products (3 products )

About the Manufacturer

Last Seen Products