GW Instek GDS-3502 | Oscilloscope, 2 channel 500 MHz, 4 GSa / s, 25 kPts, LAN, USB
Manufacturer number: GDS-3502
€3,195.00
GW Instek GDS3502 | 2-channel digital oscilloscope 500 MHz with 4 GSa / s sampling rate, visual persistence and VPO.
- Input channels: 2
- Bandwidth: 500 MHz
- Sampling rate: 4 GSa / s (real time) or 100 GSa / s (equivalent time sampling)
- 28 automatic measurements such as: Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot / Overshoot, Fall Preshoot / Overshoot, frequency, period, rising side, fall time, positive pulse width, negative pulse width, duty cycle
- Measurement of nine different delay times between the different combinations of rising or falling pulse edges of two different channels
- Autoset key for an automatic setup of all channels and the trigger system including an undo functionality of the autoset.
- Measurements with the cursor
- An independent memory for each channel with a memory depth of 25 kpoints
- VPO (Visual Persistence Oscilloscope) display technology for better signal information when signal events appear less frequently
- TFT-LCD screen diagonal: approx. 20 cm (8 inches) with 800 x 600 dots
- Several operating languages: German, English, French, Polish, Portuguese and various Asian languages
- Split screen function
- Input impedances: 50 Ω, 75 Ω, 1 MΩ
- Optional: performance analysis software
- Optional: Analysis of serial buses such as UART, I²C, SPI
- USB interfaces for external storage: 2 (1x front, 1 x rear)
- USB slave port
- LAN / Ethernet interface
- SVGA video port
- Optional: GPIB to USB
- Go / NoGo BNC output
- Calibration output
- Trigger input Internal flash memory 64 MB
- Supply voltage: AC: 100V to 240V, 48Hz to 63Hz, automatic mains voltage selection
- Power absorbed: 96 VA
- Dimensions: W 400 x H 200 x D 130 mm
- Weight: about 4 kg
- Warranty 3 years
Technical Data
Article number: | 01DS350200GT |
---|---|
Bandwidth (MHz): | 500 |
Counter: | Yes |
DVM: | Yes |
Dimensions (L x W x H) (mm): | 130 x 400 x 200 |
Function generator: | Yes |
Interfaces: | USB, LAN, GPIB, RS-232 |
Model: | GDS-3502 |
Number of channels: | 2 |
Number of digital channels: | 16 |
Samplerate: | 4 GSa/s |
Screen size: | 20,32 cm |
Screen type: | 800 x 600, Touchscreen |
Segmentable memory: | default |
Signal acquisition rate: | 3.500 wfms/s |
Storage depth: | 25 kPts |
Triggertypes: | Zone, Edge, Edge then edge, Pulse width, Pattern, Or, Rise/fall time, Nth edge burst, Runt, Setup and hold, Video |
Vertical resolution: | 8-bit |
Warranty (years): | 3 |
Weight (kg): | 4 |
Documents & Downloads
Description
GDS-3502 | Oscilloscope, 2 channel 500 MHz, 4 GSa / s, 25 kPts, LAN, USB
Please Note: This device is currently delivered without GPIB interface.
The GW Instek GDS-3000 series is designed for development and production. The special display technology offers some advantages here. For example, a digitally generated persistence period enables the highlighting of rarely occurring signals on the display. The rarity of the occurrence of the signal is also signaled by the corresponding color intensity. This technology is called VPO (Visual Persistence Oscilloscope) . A special FPGA (Field Programmable Gate Array) increases the display update rate and the signal sampling rate is specified at 4 GSa / s.
Software additions are optionally available, such as: B. for performance analysis with measurements of harmonics, ripple, inrush current and optional software for the analysis of serial buses such as I²C, UART and SPI.
About the Manufacturer
Good Will has been listed on the Taiwan Stock Exchange since 2000. Development and production focus on high quality and low cost measuring instruments for production, laboratory and education. Headquartered in Taipei, Good Will has subsidiaries in China, America, Japan, Korea and Malaysia. The products are sold in over 80 countries.