Gossen Metrawatt K148A | Power supply unit, DC, 1 channel, table 35V / 14.5A, 500W, RS232
Manufacturer number: K148A
€1,400.00
Gossen Metrawatt K148A | 1-channel laboratory power supply LABKON, computer-controlled, with an output 0 ... 35V / max. 14.5A, 500W and RS232 interface.
- Power 500 W.
- Voltage 0 ... 35 V, max. Current 14.5A
- Operating modes CV and CC, automatic switchover
- Output voltage and output current continuously adjustable from 0 to nominal value
- Several groups of parameters (device settings) can be saved and called up.
- Potential-free power output / no earthing
- High efficiency
- Safe electrical isolation
- Switchable output (Output on / off)
- Supports SCPI (standard commands for programmable devices)
- Settings via encoder and keyboard
- Multifunctional LCD display
- Protective devices, including surge protection
- Sensor operation
- Tabletop device, also suitable for installation in a 19 inch rack
- Robust, compact and easy to use
- RS232 interface, optional GPIB and USB
- Calibration (adjustment) function
- Input voltage LABKON P500: 100 V ... 240 V AC, 47 ... 63 Hz, max. 750 VA
- Weight 5.5 kg
- Dimensions: W226 x H110 x D376 (414) mm
Technical Data
AC input: | 100 V - 240 V |
---|---|
Additional functions: | Sense Fernfühlung, SCPI, CV und CC automatische Umschaltung, Kalibrier- (Justage-) Funktion |
Article number: | K148A |
Autorange: | No |
Bidirectional: | No |
DC output reversible: | DC Source |
Dimensions (L x W x H) (mm): | 414 x 226 x 110 |
Interfaces: | RS-232 Optional: USB, GPIB |
Model: | K148A |
Number of outputs: | 1 |
Protective devices: | OVP, OTP, OPP |
Warranty (years): | 2 |
Weight (kg): | 5.5 |
max. Power (A): | 14.5 |
max. Voltage (V): | 35 |
Documents & Downloads
Description
K148A | Power supply unit, DC, 1 channel, table 35V / 14.5A, 500W, RS232
With the computer-controlled KONSTANTER (laboratory power supply) of the LABKON P series, the user has a manually and remotely controllable DC power supply for laboratory and system use.
The laboratory power supply offers good dynamic properties for setpoint changes and load jumps. Due to the high stability of the power output, the nominal values can be delivered permanently and can be repeated at any time due to the exact digital setpoint specification, making results reproducible.
The user can save individual device configurations in the setup memory and call them up again if necessary. This enables time-saving setting of the device for recurring test tasks.
In addition to the standard RS232, USB or GPIB (IEEE-488) interfaces are optionally available as interfaces. Furthermore, the use of an SCPI command set enables problem-free integration into automated test systems.
Lieferumfang
- 1 tabletop unit
- 1 rubber protection
- 1 power cord (Schuko)
- 1 Safety instructions
- 1 CD-ROM: Contents of operating instructions (D and GB)
News and Knowledge
Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...