EA Elektro-Automatik PSI10750-603U | DC power supply, PSI 10000, 1 channel, 750V / 60A / 15KW, function generator

Name: PSI10750-603U | DC power supply, PSI 10000, 1 channel, 750V / 60A / 15KW, function generator
Brand: EA Elektro-Automatik
SKU: PSI10750-603U
Price: 13900.0 EUR
Availability: OutOfStock

Manufacturer number: PSI10750-603U

Delivery time upon request

€13,900.00

or choose one of the following options:

Product inquiries Request education-price

EA electro-automatic PSI 10750-60 | DC Power Supply, 3U, PSI10000 Series, 1 Channel, 750V, 60A, 15,000W, Integrated Function Generator.

Number of channels: 1
Rated Voltage Range: 0-750V
Residual ripple CV rms: ≤200 mV BW 300 kHz
Residual ripple CV pp: ≤800mV BW 20MHz
Rated Current Range: 0-60A
Power: 0-15,000W
Nominal resistance range: 0.4Ω - 740Ω
Output Capacitance: 540uF
Efficiency source / sink: 95.5%
Frequency: 45-66Hz
Power factor: >0.99
Leakage Current: <5mA
Overvoltage category: 2
Pollution degree: 2
Protection functions: OVP, OCP, OPP, OT
Digital interfaces: USB, Ethernet (100 MBit) for communication, 1x USB host for data acquisition
Expandable interfaces: CAN, CANopen, RS232, ModBus TCP, Profinet, Profibus, EtherCAT, add. Ethernet with one or two ports
Analog interface: 15-pin D-Sub

Independant Consulting

More than 25 strong brands and exclusive partnerships.

About the brands

Services

More than instruments: Before, during and after sales.

Go to the services

Demonstration & Consulting

Sales and technical support close to you.

Start request

Technical Data

AC input:	208 V - 480 V
Additional functions:	Function generator with arbitrary function Simulation of solar cells and fuel cells Maximum Power Point Tracking (MPPT) Control mode CV, CC, CP, CR TFT - touch function
Article number:	06230825
Autorange:	Yes
Bidirectional:	No
DC output reversible:	DC Source
Dimensions (L x W x H) (mm):	668 x 482,6 x 133,35
Interfaces:	USB, Ethernet, Analog
Model:	PSI10750-603U
Output power (kW):	15
Power factor:	0,99
Protective devices:	OVP, OCP, OPP, OTP
Warranty (years):	2
Weight (kg):	32.8
max. Power (A):	60
max. Voltage (V):	750

Description

PSI10750-603U | DC power supply, PSI 10000, 1 channel, 750V / 60A / 15KW, function generator

The DC laboratory power supplies of the EA Elektro-Automatik PSI 10000 series convert mains energy into a regulated DC voltage with an efficiency of over 96%. The PSI 10000 series includes single-phase and three-phase power supplies that, with their wide input range, can serve almost all mains voltages worldwide. The DC voltages and currents are oriented to the application, the spectrum ranges from 0 - 10 V to 0 - 2000 V and from 0 - 6 A to 0 - 1000 A in one device. The DC power supplies act as a flexible output stage with a constant performance characteristic, the so-called autoranging, as well as a large voltage, current and power range. In order to achieve higher power and currents, all devices have a master-slave bus. With 64 power supply units connected in parallel, this enables a system to be set up that provides up to 1920 kW and 64000 A. This system works like a single device and can consist of different power classes, only the voltage class must match.

A function generator is integrated in all models of the PSI 10000 series. This can be used to call up curves such as sine, triangle, rectangle and trapezoid in the simplest way. Voltage and current curves are freely programmable via a ramp function and an arbitrary generator. Test sequences can be saved for recurring tests and reloaded if necessary, saving valuable time.

By default, the EA power supplies are equipped with the most important digital and analogue interfaces, which are also galvanically isolated. This includes an analog interface that has configurable inputs and outputs with 0-5 V or 0-10 V for voltage, current, power and resistance, various functional inputs and outputs as well as a USB and Ethernet interface each.

The power supplies of the PSI 10000 series are ideal for relay tests in which the coils of DC relays and the contacts have to be supplied with precisely defined voltages and currents. When testing the coils, important parameters such as response, operating, holding and dropout currents as well as the associated voltages must be checked and documented. Not only the current carrying capacity and the contact resistance are important parameters for the contacts, but also the dielectric strength and breaking capacity say a lot about the quality of the products.

Furthermore, the PSI 10000 power supplies are ideally suited for simulating fuel cells. With the help of these simulations, both the energy storage device and the components that are supplied by it can be optimally designed. Wherever reproducible data is required, working with a simulator is the first choice. In addition, when using the simulator as a supply source, various protective mechanisms are in effect to protect the connected consumer.

The PSI 10000 are also suitable for on-board charger tests (OBC). Here, the OBC must be tested for its electrical properties under various conditions. This requires a flexible test system that also provides measurement data. With the sequencing & logging function, test sequences can be loaded into the PS 10000 devices and data can be read out and saved.

The programmable power supplies of the PSI 10000 series are ideal as test systems for PV inverters because they have the necessary simulation unit for solar cells. Users can quickly and easily program their simulation models according to EN 50530 or Sandia and use the properties of a wide variety of solar cell materials.

The variant PSI 10750-60 of the EA PSI10000 series presented here measures 3 HU (3U) and has a voltage of 0 - 750 V, 0 - 60 A current, 0 - 15,000 W power and, like all models of the PSI 10000 series, a integrated function generator.

General characteristics of the series:

Wide input range, 208V - 480V +10% 3ph AC
Active power factor correction, typically 0.99
Very high efficiency of over 96%
High performance with 15 kW per unit
Voltage from 0 - 60 V to 0 - 2000 V
Current from 0 - 20 A to 0 - 510 A
Flexible power-controlled DC output stages (autoranging)
Control mode CV, CC, CP, CR with fast transition
Digital control, high resolution with 16bit ADCs and DACs
Colored 5" TFT display, touch function and intuitive operation
Galvanically isolated share bus for parallel operation of all performance classes in the 10000 series
Master-slave bus for parallel operation, up to 64 devices of all performance classes of the 10000 series
Integrated function generator with predefined curves
Predefined automotive test procedures for LV123, LV124 and LV148
Standard interfaces: USB, Ethernet, analog, USB host, master-slave bus, share bus
Optional interfaces: CAN, CANopen, RS232, Profibus, EtherCAT, Profinet with one or two ports, Modbus with one or two ports, add. Ethernet with one or two ports
Command languages and drivers: SCPI and ModBus, LabVIEW, IVI

Alternate products (22 products )

Serie

Serie

EA Elektro-Automatik PSI10060-1703U

DC power supply, PSI 10000, 1 channel, 60V / 170A / 5KW, function generator

Delivery time upon request

€6,800.00

Serie

Serie

EA Elektro-Automatik PSI10060-3403U

DC power supply, PSI 10000, 1 channel, 60V / 340A / 10KW, function generator

Delivery time upon request

€9,100.00

Serie

Serie

EA Elektro-Automatik PSI10060-5103U

DC power supply, PSI 10000, 1 channel, 60V / 510A / 15KW, function generator

Delivery time upon request

€12,800.00

Serie

Serie

EA Elektro-Automatik PSI10080-1703U

DC power supply, PSI 10000, 1 channel, 80V / 170A / 5KW, function generator

Delivery time upon request

€6,800.00

Serie

Serie

EA Elektro-Automatik PSI10080-3403U

DC power supply, PSI 10000, 1 channel, 80V / 340A / 10KW, function generator

Delivery time upon request

€9,100.00

Serie

Serie

EA Elektro-Automatik PSI10080-5103U

DC power supply, PSI 10000, 1 channel, 80V / 510A / 15KW, function generator

Delivery time upon request

€12,800.00

Serie

Serie

EA Elektro-Automatik PSI10200-1403U

DC power supply, PSI 10000, 1 channel, 200V / 140A / 10KW, function generator

Delivery time upon request

€9,100.00

Serie

Serie

EA Elektro-Automatik PSI10200-2103U

DC power supply, PSI 10000, 1 channel, 200V / 210A / 15KW, function generator

Delivery time upon request

€12,800.00

Serie

Serie

EA Elektro-Automatik PSI10200-703U

DC power supply, PSI 10000, 1 channel, 200V / 70A / 5KW, function generator

Delivery time upon request

€6,800.00

Serie

Serie

EA Elektro-Automatik PSI10360-1203U

DC power supply, PSI 10000, 1 channel, 360V / 120A / 15KW, function generator

Delivery time upon request

€12,800.00

Serie

Serie

EA Elektro-Automatik PSI10360-403U

DC power supply, PSI 10000, 1 channel, 360V / 40A / 5KW, function generator

Delivery time upon request

€6,800.00

Serie

Serie

EA Elektro-Automatik PSI10360-803U

DC power supply, PSI 10000, 1 channel, 360V / 80A / 10KW, function generator

Delivery time upon request

€9,100.00

Serie

Serie

EA Elektro-Automatik PSI10500-303U

DC power supply, PSI 10000, 1 channel, 500V / 30A / 5KW, function generator

2 in stock. Ready to ship in 1 business day

€7,000.00

Serie

Serie

EA Elektro-Automatik PSI10500-603U

DC power supply, PSI 10000, 1 channel, 500V / 60A / 10KW, function generator

Delivery time upon request

€9,800.00

Serie

Serie

EA Elektro-Automatik PSI10500-903U

DC power supply, PSI 10000, 1 channel, 500V / 90A / 15KW, function generator

Delivery time upon request

€13,900.00

Serie

Serie

EA Elektro-Automatik PSI10750-203U

DC power supply, PSI 10000, 1 channel, 750V / 20A / 5KW, function generator

Delivery time upon request

€7,000.00

Serie

Serie

EA Elektro-Automatik PSI10750-403U

DC power supply, PSI 10000, 1 channel, 750V / 40A / 10KW, function generator

Delivery time upon request

€9,800.00

Serie

Serie

EA Elektro-Automatik PSI11000-303U

DC power supply, PSI 10000, 1 channel, 1000V / 30A / 10KW, function generator

Delivery time upon request

€10,100.00

Serie

Serie

EA Elektro-Automatik PSI11000-403U

DC power supply, PSI 10000, 1 channel, 1000V / 40A / 15KW, function generator

Delivery time upon request

€14,300.00

Serie

Serie

EA Elektro-Automatik PSI11500-203U

DC power supply, PSI 10000, 1 channel, 1500V / 20A / 10KW, function generator

Delivery time upon request

€10,100.00

Serie

Serie

EA Elektro-Automatik PSI11500-303U

DC power supply, PSI 10000, 1 channel, 1500V / 30A / 15KW, function generator

1 in stock. Ready to ship in 1 business day

€14,300.00

Serie

Serie

EA Elektro-Automatik PSI12000-203U

DC power supply, PSI 10000, 1 channel, 2000V / 20A / 15KW, function generator

Delivery time upon request

€14,300.00

News and Knowledge

Modern applications for power supplies.

Power supply units are as diverse as their areas of application. What do you personally use your power supply unit for? ...

17/03/2021

Reading time 5 Min.

257

About the Manufacturer

EA Elektro-Automatik

EA Elektro-Automatik is one of the leading German manufacturers of laboratory power supplies and electronic loads for research and development as well as industrial applications in control and automation, electrochemistry, automated test systems and test benches.

EA Elektro-Automatik PSI10750-603U | DC power supply, PSI 10000, 1 channel, 750V / 60A / 15KW, function generator

EA electro-automatic PSI 10750-60 | DC Power Supply, 3U, PSI10000 Series, 1 Channel, 750V, 60A, 15,000W, Integrated Function Generator.

Technical Data

Documents & Downloads

Description

PSI10750-603U | DC power supply, PSI 10000, 1 channel, 750V / 60A / 15KW, function generator

General characteristics of the series:

Alternate products (22 products )

Alternate products (22 products )

News and Knowledge

About the Manufacturer

Last Seen Products